SecureDrop Workstation is in a limited beta phase, and is not recommended for general use at this time. See our blog post for more information.
Qubes OS hardware requirements¶
In order to install and use SecureDrop Workstation, you will need a Qubes-Compatible computer with the following speifications:
- 64-bit Intel or AMD processor with virtualization support
- a minimum of 16GB RAM (32GB recommended for production use)
- sufficient disk space for the Qubes OS base install and SecureDrop Workstation VMs (a 128GB or greater SSD is recommended)
In order to print submissions, a supported non-networked printer is required. Supported models currently include:
- Brother HL-L2320D
- HP LaserJet Pro M404n
More printer options will be added in future releases.
Lenovo ThinkPad T480¶
The ThinkPad T480 is a recommended option for SecureDrop Workstation, as it is being used by the core team for development and testing. If you plan to use it, you should follow the instructions below to ensure that the BIOS is up to date before proceeding with the installation:
Upgrading the T480 BIOS¶
The instructions below assume the use of a Linux-based computer for the creation of a BIOS upgrade USB. To upgrade the T480 BIOS:
- Locate the machine type of the T480 - it be found via the
Maintab in Thinkpad Setup (accessed by pressing Enter on startup). For recent T480s, it will be a string like 20L5 or 20L6.
- Visit https://support.lenovo.com in the Linux-based computer. Type the machine type found above into the search bar, then press Enter.
- In the T480 Product Home page, select Drivers And Software and choose BIOS/UEFI.
- Expand the BIOS Update listing and download the BIOS Update (Bootable CD) file.
A Tails USB can be used for the verification and conversion process described below, but the Lenovo support site blocks requests over Tor, preventing the ISO download. To work around this, either:
download the BIOS ISO on a different computer and transfer it to Tails using a USB stick, or
download the ISO in Tails using the Unsafe Browser as follows:
Start Tails with an administration password set and the Unsafe Browser enabled under “Additional Settings” on the Welcome Screen.
Open the Unsafe Browser: Applications > Internet > Unsafe Browser and find and download the ISO
Note the filename, as you’ll need it for subsequent steps.
Leave the Unsafe Browser running, and open a terminal via Applications > System Tools > Terminal.
Copy the ISO to the desktop with the command:
sudo cp /var/lib/unsafe-browser/chroot/home/clearnet/Downloads/<fileName.iso> ~amnesia/Desktop
Fix the ISO file’s ownership with the command:
sudo chown amnesia:amnesia ~amnesia/Desktop/<fileName.iso>
Verify the checksum of the downloaded ISO file using the following command, comparing it against the checksum in the file listing above:
Create a USB-bootable version of the ISO using the command:
geteltorito <path/to/CDISO> > usb-bios.iso
To install the
geleltoritoutility on Debian-based systems, use the command
sudo apt install genisoimage
To install it on Fedora-based systems, use the command:
sudo dnf install geteltorito genisoimage
Plug in a USB and check its device name with the
lsblkcommand - use the root device name below, not a partition (eg.
Write the BIOS update ISO to the USB using the following command:
sudo dd if=usb-bios.iso of=/dev/sdX bs=1M && sync
sdXis the device name verified above.
ddcommand will wipe data on the targeted device. Make sure that you use the correct device name.
Once complete, remove the USB.
Plug the USB into the T480 and boot it, pressing F12 on startup. Select the USB’s listing in the boot menu.
Follow the on-screen instructions to update the BIOS, including any mandatory reboots. Note that the instructions may refer to an update CD instead of your update USB.
If you intend to use USB-C ports, please note that our recommended BIOS settings will disable dual USB-C/Thunderbolt ports (recognizable by the Thunderbolt logo next to the port). The T480 includes two USB-C ports, specified as follows:
- 1 x USB 3.1 Gen 1 Type-C (Power Delivery, DisplayPort, Data transfer)
- 1 x USB 3.1 Gen 2 Type-C / Intel Thunderbolt 3 (Power Delivery, DisplayPort, Data transfer)
The first of these ports will continue to function as a USB-C port. After disabling Thunderbolt, the second port can no longer be used for Thunderbolt or for USB-C data transfer, but it can still be used for power delivery (i.e. to plug in your AC adapter). If you are unsure about the features of your laptop’s USB-C ports, or if you are using a different make or model, please consult the technical specifications of your laptop for further information.